| N5K-C5596T-FA Specifications |
| Performance |
● Layer 2 hardware forwarding at 1920 Gbps or 1428 mpps; Layer 3 performance of up to 160 Gbps or 240 mpps
● MAC address table entries: 32,000
● Low-latency cut-through design that provides predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features on 10 Gigabit Ethernet interfaces
● Line-rate traffic throughput on all ports |
| Interfaces |
● 32 fixed ports of 1 and 10G BASE-T and 16 SFP+ fixed ports configurable as 1 and 10 Gigabit Ethernet and FCoE or 8/4/2/1-Gbps native Fibre Channel; additional interfaces through up to three expansion modules
● Expansion modules
● 16-port 1 and 10 Gigabit Ethernet and FCoE module
● 8-port 8/4/2/1-Gbps Fibre Channel plus 8-port 1 and 10 Gigabit Ethernet and FCoE module
● Unified port module consisting of 16 ports configurable as 8/4/2/1-Gbps Fibre Channel or 1 and 10 Gigabit Ethernet and FCoE
● 4-port QSFP expansion module
● 12-port 10G BASE-T module (Cisco Nexus 5596T only)
● Layer 3 module (Cisco Nexus 5596UP and 5596T only; one per system)
● Layer 3 daughter card (Cisco Nexus 5548P and 5548UP only; one per system)
● Extension through the Cisco Nexus 2000 Series |
|
| Layer 2 Features |
● Layer 2 switch ports and VLAN trunks
● IEEE 802.1Q VLAN encapsulation
● Support for up to 4096 VLANs
● Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible)
● Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances
● Spanning Tree PortFast
● Spanning Tree root guard
● Spanning Tree Bridge Assurance
● Cisco EtherChannel technology (up to 16 ports per EtherChannel)
● Cisco vPC technology
● Enhanced vPC enable vPC between Cisco Nexus 5000 and 2000 Series as well as between Cisco Nexus 3000 Series and end host
● vPC configuration synchronization
● Link Aggregation Control Protocol (LACP): IEEE 802.3ad
● Advanced port channel hashing based on Layer 2, 3, and 4 information
● Jumbo frames on all ports (up to 9216 bytes)
● Pause frames (IEEE 802.3x)
● Storm control (unicast, multicast, and broadcast)
● Private VLANs
● Private VLAN over trunks (isolated and promiscuous)
● Private VLANs over vPC and EtherChannels
● VLAN Remapping
● Cisco FabricPath
● EvPC and vPC+ with FabricPath
● Cisco Adapter FEX
● Cisco Data Center VM FEX
● Support for up to 24 fabric extenders on each Cisco Nexus 5500 platform |
|
| Layer 3 Features |
● Layer 3 interfaces: Routed ports on Cisco Nexus 5500 platform interfaces, switch virtual interface (SVI), port channels, subinterfaces, and port channel subinterfaces for a total of 4096 entries
● Support for up to 8000 prefixes and up to 16000 IPv4 and 8000 IPv6 host entries
● Support for up to 8000 multicast routes
● Support for up to 8000 IGMP groups
● Support for 1000 VRF entries
● Support for up to 4096 VLANs
● 16-way equal-cost multipathing (ECMP)
● 1664 ingress and 2048 egress access control list (ACL) entries
● Routing protocols: Static, Routing Information Protocol Version2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First Version 2 (OSPFv2), and Border Gateway Protocol (BGP)
● IPv6 Routing Protocols: Static, Open Shortest Path First Version 3 (OPFv3), Border Gateway Protocol (BGPv6), Enhanced Interior Gateway Routing Protocol (EIGRPv6)
● IPv6 VRF Lite
● Hot-Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
● ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACL
● Multicast: Protocol Independent Multicast Version 2 (PIMv2) sparse mode, Source Specific Multicast (SSM), Multicast Source Discovery Protocol (MSDP), Internet Group Management Protocol Versions 2, and 3 (IGMP v2, and v3), and Multicast VLAN Registration (MVR)
● Virtual Route Forwarding (VRF): VRF-lite (IP VPN); VRF-aware unicast; and BGP-, OSPF-, RIP-, and VRF-aware multicast
● Unicast Reverse Path Forwarding (uRFP) with ACL; strict and loose modes
● Jumbo frame support (up to 9216 bytes)
● Support for up to 16 fabric extender on each Nexus 5500 with L3 modules
● RFC 896 |
|
| QoS |
● Layer 2 IEEE 802.1p (CoS)
● 8 hardware queues per port
● Per-port QoS configuration
● CoS trust
● Port-based CoS assignment
● Modular QoS CLI (MQC) compliance – IPv4 and IPv6
● ACL-based QoS classification (Layers 2, 3, and 4)
● MQC CoS marking
● Per-port virtual output queuing
● CoS-based egress queuing
● Egress strict-priority queuing
● Egress port-based scheduling: Weighted Round-Robin (WRR)
● Control Plan Policing (CoPP) – IPv4 and IPv6 |
|
| Security |
● Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports
● Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc.
● Standard and extended Layer 3 to 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram Protocol (UDP), etc.
● VLAN-based ACLs (VACLs)
● Port-based ACLs (PACLs)
● Named ACLs
● Optimized ACL distribution
● ACLs on virtual terminals (VTYs)
● ACL logging on management interface
● Dynamic Host Configuration Protocol (DHCP) snooping with Option 82
● Dynamic Address Resolution Protocol (ARP) Inspection
● IP source guard
● DHCP relay
● Cisco CTS (Authentication and Policy download from ACS)
● Ethernet Port Security
● IPv6 RACL
● IPv6 PACL
● IPv6 VACL |
|
| High-Availability Features |
● In-Service Software Upgrade (ISSU) for Layer 2
● Hot-swappable field-replaceable power supplies, fan modules, and expansion modules
● 1:1 power redundancy
● N:1 fan module redundancy |
|
| Management |
● Switch management using 10/100/1000-Mbps management or console ports
● CLI-based console to provide detailed out-of-band management
● In-band switch management
● Locator and beacon LEDs on Cisco Nexus 2000 Series
● Port-based locator and beacon LEDs
● Configuration synchronization
● Module preprovisioning
● Configuration rollback
● Secure Shell Version 2 (SSHv2)
● Telnet
● AAA
● AAA with RBAC
● RADIUS
● TACACS+
● Syslog (8 servers)
● Embedded packet analyzer
● SNMPv1, v2, and v3 (IPv4 & IPv6)
● Enhanced SNMP MIB support
● XML (NETCONF) support
● Remote monitoring (RMON)
● Advanced Encryption Standard (AES) for management traffic
● Unified username and passwords across CLI and SNMP
● Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)
● Digital certificates for management between switch and RADIUS server
● Cisco Discovery Protocol Versions 1 and 2
● RBAC
● Switched Port Analyzer (SPAN) on physical, port channel, VLAN, and Fibre Channel interfaces
● Encapsulated Remote SPAN (ERSPAN)
● Ingress and egress packet counters per interface
● Network Time Protocol (NTP)
● Cisco GOLD
● Comprehensive bootup diagnostic tests
● Call Home
● Smart Call Home
● Cisco Fabric Manager
● Cisco DCNM
● CiscoWorks LAN Management Solution (LMS) |
|
| Data Center Bridging |
● CEE- and IEEE-compliant PFC (per-priority Pause frame support)
● PFC link distance support: 3000m
● CEE-compliant DCBX Protocol
● CEE- and IEEE-compliant Enhanced Transmission Selection |
|
| Fibre Channel and FCoE Features (Requires Storage Services License) |
● T11 standards-compliant FCoE (FC-BB-5)
● T11 FCoE Initialization Protocol (FIP) (FC-BB-5)
● Any 10 Gigabit Ethernet port configurable as FCoE
● SAN administration separate from LAN administration
● FCP
● Fibre Channel forwarding (FCF)
● Fibre Channel standard port types: E, F, and NP
● Fibre Channel enhanced port types: VE, TE, and VF
● F-port trunking
● F-port channeling
● Direct attachment of FCoE and Fibre Channel targets
● Up to 240 buffer credits per native Fibre Channel port
● Up to 32 VSANs per switch
● Fibre Channel (SAN) port channel
● Native Interop Mode 1
● Native Interop Mode 2
● Native Interop Mode 3
● Native Interop Mode 4
● VSAN trunking
● Fabric Device Management Interface (FDMI)
● Fibre Channel ID (FCID) persistence
● Distributed device alias services
● In-order delivery
● Port tracking
● Cisco N-Port Virtualization (NPV) technology
● N-port identifier virtualization (NPIV)
● Fabric services: Name server, registered state change notification (RSCN), login services, and name-server zoning
● Per-VSAN fabric services
● Cisco Fabric Services
● Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) and Fibre Channel Security Protocol (FC-SP)
● Distributed device alias services
● Host-to-switch and switch-to-switch FC-SP authentication
● Fabric Shortest Path First (FSPF)
● Fabric binding for Fibre Channel
● Standard zoning
● Port security
● Domain and port
● Enhanced zoning
● SAN port channels
● Cisco Fabric Analyzer
● Fibre Channel traceroute
● Fibre Channel ping
● Fibre Channel debugging
● Cisco Fabric Manager support
● Storage Management Initiative Specification (SMI-S)
● Boot from SAN over VPC/EVPC |
|
| Generic MIBs |
● SNMPv2-SMI
● CISCO-SMI
● SNMPv2-TM
● SNMPv2-TC
● IANA-ADDRESS-FAMILY-NUMBERS-MIB
● IANAifType-MIB
● IANAiprouteprotocol-MIB
● HCNUM-TC
● CISCO-TC
● SNMPv2-MIB
● SNMP-COMMUNITY-MIB
● SNMP-FRAMEWORK-MIB
● SNMP-NOTIFICATION-MIB
● SNMP-TARGET-MIB
● SNMP-USER-BASED-SM-MIB
● SNMP-VIEW-BASED-ACM-MIB
● CISCO-SNMP-VACM-EXT-MIB |
|
| Layer 3 MIBs |
● UDP-MIB
● TCP-MIB
● OSPF-MIB
● BGP4-MIB
● CISCO-HSRP-MIB |
| Fibre Channel MIBs |
● CISCO-ST-TC
● CISCO-FC-FE-MIB
● CISCO-FCSP-MIB
● CISCO-PORT-TRACK-MIB
● CISCO-PSM-MIB
● CISCO-FC-SPAN-MIB
● CISCO-PORT-CHANNEL-MIB
● CISCO-RSCN-MIB
● CISCO-NS-MIB
● CISCO-FCS-MIB
● CISCO-DM-MIB
● FIBRE-CHANNEL-FE-MIB
● CISCO-FC-ROUTE-MIB
● CISCO-FSPF-MIB
● CISCO-ZS-MIB
● CISCO-ZS-EXT-MIB
● CISCO-VSAN-MIB
● CISCO-CFS-MIB
● CISCO-FCPING-MIB
● CISCO-FCTRACEROUTE-MIB
● CISCO-FDMI-MIB
● CISCO-FC-DEVICE-ALIAS-MIB
● CISCO-WWNMGR-MIB
● FCMGMT-MIB
● CISCO-VEDM-MIB
● CISCO-FCOE-MIB |
| Ethernet MIBs |
● CISCO-VLAN-MEMBERSHIP-MIB
● CISCO-Virtual-Interface-MIB |
| Configuration MIBs |
● ENTITY-MIB
● IF-MIB
● CISCO-ENTITY-EXT-MIB
● CISCO-ENTITY-FRU-CONTROL-MIB
● CISCO-ENTITY-SENSOR-MIB
● CISCO-FLASH-MIB
● CISCO-SYSTEM-MIB
● CISCO-SYSTEM-EXT-MIB
● CISCO-IP-IF-MIB
● CISCO-IF-EXTENSION-MIB
● CISCO-SERVER-INTERFACE-MIB
● CISCO-NTP-MIB
● CISCO-IMAGE-MIB
● CISCO-IMAGE-CHECK-MIB
● CISCO-IMAGE-UPGRADE-MIB
● CISCO-CONFIG-COPY-MIB
● CISCO-ENTITY-VENDORTYPE-OID-MIB
● CISCO-BRIDGE-MIB |
| Monitoring MIBs |
● DIFFSERV-DSCP-TC
● NOTIFICATION-LOG-MIB
● DIFFSERV-MIB
● CISCO-CALLHOME-MIB
● CISCO-SYSLOG-EXT-MIB
● CISCO-PROCESS-MIB
● RMON-MIB
● CISCO-RMON-CONFIG-MIB
● CISCO-HC-ALARM-MIB |
| Security MIBs |
● CISCO-AAA-SERVER-MIB
● CISCO-AAA-SERVER-EXT-MIB
● CISCO-COMMON-ROLES-MIB
● CISCO-COMMON-MGMT-MIB
● CISCO-RADIUS-MIB
● CISCO-SECURE-SHELL-MIB
● TCP/IP MIBs
● INET-ADDRESS-MIB
● TCP-MIB
● CISCO-TCP-MIB
● UDP-MIB
● IP-MIB
● CISCO-IP-PROTOCOL-FILTER-MIB
● CISCO-DNS-CLIENT-MIB
● CISCO-PORTSECURITY- MIB |
| Miscellaneous MIBs |
● START-MIB
● CISCO-LICENSE-MGR-MIB
● CISCO-FEATURE-CONTROL-MIB
● CISCO-CDP-MIB
● CISCO-RF-MIB
● CISCO-ETHERNET-FABRIC-EXTENDER-MIB
● CISCO-BRIDGE-MIB |
| Industry Standards |
● IEEE 802.1D: Spanning Tree Protocol
● IEEE 802.1p: CoS prioritization
● IEEE 802.1Q: VLAN tagging
● IEEE 802.1Qaz: Enhanced transmission selection
● IEEE 802.1Qbb: Per-priority Pause
● IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol
● IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol
● IEEE 802.3: Ethernet
● IEEE 802.3ad: LACP with fast timers
● IEEE 802.3ae: 10 Gigabit Ethernet
● SFF 8431 SFP+ CX1 support
● RMON
● IEEE 1588-2008: Precision Time Protocol (Boundary Clock) |
| Fibre Channel Standards |
● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994)
● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996)
● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999)
● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997)
● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998)
● FC-PI, Revision 13 (ANSI/INCITS 352-2002)
● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006)
● FC-PI-4, Revision 7.0
● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003)
● FC-FS-2, Revision 0.91
● FC-LS, Revision 1.2
● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001)
● FC-SW-3, Revision 6.6 (ANSI/INCITS 384-2004)
● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001)
● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)
● FC-BB-5, Revision 2.0 for FCoE
● FCP, Revision 12 (ANSI/INCITS 269-1996)
● FCP-2, Revision 8 (ANSI/INCITS 350-2003)
● FCP-3, Revision 4 (ANSI/INCITS 416-2006)
● FC-MI, Revision 1.92 (INCITS TR-30-2002, except for FL-ports and Class 2)
● FC-MI-2, Revision 2.6 (INCITS TR-39-2005, except for FL-ports and Class 2)
● FC-SP, Revision 1.6
● FC-DA, Revision 3.1 (INCITS TR-36-2004, except for FL-ports, SB-ports and Class 2)
● Class of Service: Class 3, Class F
● Fibre Channel standard port types: E and F
● Fibre Channel enhanced port types: SD and TE |
| Physical Specifications |
| SFP+ Optics |
Cisco Nexus 5500 platform supports 10 Gigabit Ethernet SFP+ copper Twinax cables for short distances and SFP+ optics (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, GLC-ZX-SM and Cisco Nexus 2000 Series Fabric Extender Transceiver [FET-10G]) for longer distances. SFP+ has several advantages compared to other 10 Gigabit Ethernet connectivity options:
● Small 10 Gigabit Ethernet form factor
● Optical interoperability with XENPAK, X2, and XFP interface types
● Low power consumption
● Hot-swappable device
● Cisco Nexus 5500 platform products support 8-Gbps Fibre Channel-compatible SFP+ for native Fibre Channel connectivity options; 8-Gbps Fibre Channel-compatible short-reach and 10-km long-reach SFP transceiver modules operate at 8/4/2 Gbps and are supported in the 8‑Gbps-capable native Fibre Channel ports on expansion modules and unified ports |
| Physical (height x width x depth) |
3.47 x 17.3 x 29.5 in. (8.8 x 43.9 x 74.9 cm) |
| Operating temperature |
32 to 104°F (0 to 40°C) |
| Nonoperating (storage) temperature |
-40 to 158°F (-40 to 70°C) |
| Humidity |
5 to 95% (noncondensing) |
| Altitude |
0 to 10,000 ft (0 to 3000m) |
| Weight |
47.5 lb (21.55 kg) |
